Xref: utzoo comp.sys.3b1:417 unix-pc.general:7533 comp.sys.att:11858 Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!tut.cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!cbnews!mvadh From: mvadh@cbnews.att.com (andrew.d.hay) Newsgroups: comp.sys.3b1,unix-pc.general,comp.sys.att Subject: Re: Floppy controller based cartridge for 3b1? Message-ID: <1991Feb21.115017.21374@cbnews.att.com> Date: 21 Feb 91 11:50:17 GMT References: <435@yonder.UUCP> Distribution: na Organization: AT&T Bell Laboratories Lines: 26 In article <435@yonder.UUCP> michael@yonder.UUCP (Michael E. Haws) writes: "I realize I am very likely showing my ignorance, but nothing "ventured nothing gained. Is there any chance that the "floppy controlled based mini-cartridges (40 mg) would work "with the 3b1. I use them at work on a compaq running "SCO xenix. The cartridges have to be formatted before use "just as if they were a floppy. you're talking about qic-40 tapes, right? "There is probably something obvious as to why this would "not work (i.e. need different device driver, hardware incompatibilty, "etc). Sure would be nice if it did work. yes, it does require a device driver, which i plan to work on just as soon as i get my hd2 board (are you listening, jbm? ;^>). this is a project of long standing - coming up on a year - which has been on hold because of the difficulty of working with only one floppy device on the 3b1. i have done a substantial amount of design work for it, though. -- Andrew Hay +------------------------------------------------------+ Ragged Individualist | JAAAAAAANE! | AT&T-BL Ward Hill MA | HOW DO YOU STOP THIS CRAZY THING? | a.d.hay@att.com +------------------------------------------------------+ Brought to you by Super Global Mega Corp .com