Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!nstn.ns.ca!news.cs.indiana.edu!samsung!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!news.funet.fi!funic!santra!kaira.hut.fi!d37630m From: d37630m@kaira.hut.fi (Mika Ilmaranta) Newsgroups: comp.sys.amiga.hardware Subject: Re: Amiga serial hardware Keywords: serial hw Message-ID: <1991Feb22.233557.27477@santra.uucp> Date: 22 Feb 91 23:35:57 GMT References: Sender: news@santra.uucp (Cnews - USENET news system) Reply-To: d37630m@kaira.hut.fi (Mika Ilmaranta) Organization: Helsinki University of Technology, FINLAND Lines: 20 I've noticed the same problems using Amiga w/ my Xenix as a terminal at 19200 baud and I got this funny idea of creating a serial card with an other 68000, some RAM to buffer incoming and outgoing data, a real serial co-processor and ofcource some ROM to hold software to run the 68000. But then I heard that A3000 can hold up to 38400 with no problems since it has faster processor (actually a friend of mine has one A3000 hooked up to a ix386 system and has had no problems with 38400). That made me drop the idea at least for a while (I'm trying to get my hands on a A3000 UXD thoug it seems very hard ...) but feel free to use my idea. By the way have you tried out AZcomm 3.2. At least it can send >3000 chars/sec with 38400 with Z-modem protocol and it seems to work fine otherways too (unless you are living in finland as I am, it doesn't support scandinavian letters). -- Wake up there! - ilmis@niksula.hut.fi -