Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!caen!news.cs.indiana.edu!att!linac!gad
From: gad@linac.fnal.gov (Greg A. Deuerling)
Newsgroups: comp.sys.amiga.hardware
Subject: ST157N
Message-ID: <#Y-#3D=@linac.fnal.gov>
Date: 23 Feb 91 17:41:27 GMT
Sender: gad@linac.fnal.gov (Greg A. Deuerling)
Organization: Fermilab, Batavia, IL
Lines: 18


	I've just got a used Seagate ST257N with no documentation.
Can any one out there tell me how to set up the SCSI ID on this.  I have
a ST277N also,  but the jumper block is not the same on the ST157N.
Any help at all will be much appreciated.

							Thanks...

							gad



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
=	     Greg Deuerling, Fermi National Accelerator Laboratory	      =
=	   P.O.Box 500   MS#127  Batavia, Il  60510   1(708)840-4629          =
= 			    Computer R&D Group				      =
=		            gad@linac.fnal.gov				      =
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=