Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!nstn.ns.ca!news.cs.indiana.edu!ux1.cso.uiuc.edu!cs326ag
From: cs326ag@ux1.cso.uiuc.edu (Loren J. Rittle)
Newsgroups: comp.sys.amiga.introduction
Subject: Re: Close box probs in 2.0 under Wshell
Message-ID: <1991Feb23.025654.28328@ux1.cso.uiuc.edu>
Date: 23 Feb 91 02:56:54 GMT
References: <4193@orbit.cts.com> <1991Feb22.211518.26510@csun.edu>
Organization: University of Illinois at Urbana
Lines: 29

In article <1991Feb22.211518.26510@csun.edu> srw@csun.edu writes:
>In article <4193@orbit.cts.com> chucks@pnet51.orb.mn.org (Erik Funkenbusch) writes:
>>I have a problem with the close box when using Wshell.  it requires me to
>>click 5 times in the box before it will close.  this is on a 3000 under 2.02. 
>
>The WShell requires ConMan to recognize the close gadget.  The close gadget
>on the standard 2.0 CON: device (was NEWCON: on 1.3) sends an EOF to WShell;
>as a safety valve against accidental ^\ hits, five are required.
>
>Install ConMan.  I have ConMan mounted as CNC:.  Then, I did a Setenv
>SHELLWINDOW "CNC:0/0/600/250/WShell/c" so that the latter is the default
>window for a NewWSH command.  Finally, I modified the WINDOW= item in
>the ToolTypes for my WShell icons to also point to CNC:.  Works fine.

I have to second this.  You must not be using fcomp, if you don't
have ConMan installed!  Fcomp as you must know, is the file name
completer.  It needs WShell and ConMan to operate.  (WShell 1.2, BTW
If you don't have version 1.2, you may want to upgrade now!)

>--
>Stephen R. Walton, Dept. of Physics and Astronomy, Cal State Northridge
>I am srw@csun.edu no matter WHAT the stupid From: line says!


-- 
``NewTek stated that the Toaster *would not* be made to directly support the
  Mac, at this point Sculley stormed out of the booth...'' -A scene at the
  recent MacExpo.  Gee, you wouldn't think that an Apple Exec would be so
  worried about one little Amiga Device... Loren J. Rittle  l-rittle@uiuc.edu