Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!src.honeywell.com!msi.umn.edu!cs.umn.edu!sialis!orbit!pnet51!chucks
From: chucks@pnet51.orb.mn.org (Erik Funkenbusch)
Newsgroups: comp.sys.amiga.introduction
Subject: Re: Close box probs in 2.0 under Wshell
Message-ID: <4213@orbit.cts.com>
Date: 24 Feb 91 22:45:32 GMT
Sender: news@orbit.cts.com
Organization: People-Net [pnet51], Minneapolis, MN.
Lines: 25

bcphyagi@csunb.csun.edu (Stephen Walton) writes:
>In article <4193@orbit.cts.com> chucks@pnet51.orb.mn.org (Erik Funkenbusch) writes:
>>I have a problem with the close box when using Wshell.  it requires me to
>>click 5 times in the box before it will close.  this is on a 3000 under 2.02. 
>
>The WShell requires ConMan to recognize the close gadget.  The close gadget
>on the standard 2.0 CON: device (was NEWCON: on 1.3) sends an EOF to WShell;
>as a safety valve against accidental ^\ hits, five are required.
>
>Install ConMan.  I have ConMan mounted as CNC:.  Then, I did a Setenv
>SHELLWINDOW "CNC:0/0/600/250/WShell/c" so that the latter is the default
>window for a NewWSH command.  Finally, I modified the WINDOW= item in
>the ToolTypes for my WShell icons to also point to CNC:.  Works fine.
 
Thanks, however last time i tried to install conman i lost the zoom gadget
from the cli window, (which i use all the time).  is there any way to get this
back?

>--
>Stephen R. Walton, Dept. of Physics and Astronomy, Cal State Northridge
>I am srw@csun.edu no matter WHAT the stupid From: line says!

UUCP: {amdahl!tcnet, crash}!orbit!pnet51!chucks
ARPA: crash!orbit!pnet51!chucks@nosc.mil
INET: chucks@pnet51.orb.mn.org