Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!zaphod.mps.ohio-state.edu!tut.cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!mp.cs.niu.edu!ux1.cso.uiuc.edu!mrcnext!chuck From: chuck@mrcnext.uiuc.edu (charles bridgeland) Newsgroups: comp.sys.atari.st.tech Subject: Re: Adjusting the SM124 Message-ID: Date: 25 Feb 91 13:00:01 GMT References: <27C8984D.9979@ics.uci.edu> Sender: usenet@ux1.cso.uiuc.edu (News) Organization: University of Illinois at Urbana Lines: 26 ehood@paris.ics.uci.edu (Earl Hood) writes: >Is there anyway to adjust the vertical height on a SM124? The monitor has >no visible buttons on the outside to make the adjustments. >I would like to know if it could be done, because images look slightly >scrunched on the screen. >Earl >reply to ehood@paris.ics.uci.edu >-- >Earl Hood (UC Irvine) -------------------------------> ehood@paris.ics.uci.edu ------------------------------- hoho, you're in for some fun you hve to do that on the inside. get some plastic tv adjustment tools fromradio shark or someplace. open the monitor case and look down onto the main board. they're all labeled pretty clearly (bunch of little white potentiometers, and one adj. inductor, for which you will need a plastic hex head tool). -- ---------------------------------------------------------------------------- chuck bridgeland---anarchoRepublican --don't forget, we surround _them_, not the other way around" chuck@mrcnext.cso.uiuc.edu hire me so I can quit this pit. -----------------------------------------------------------------------------