Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!wuarchive!rex!mandel@vax.anes.tulane.edu
From: mandel@vax.anes.tulane.edu (Jeff E Mandel MD MS)
Newsgroups: comp.sys.dec
Subject: Re: Trailblazer setup - help needed!
Message-ID: <6279@rex.cs.tulane.edu>
Date: 22 Feb 91 23:29:04 GMT
References: <400@motto.UUCP>
Sender: news@rex.cs.tulane.edu
Organization: Tulane University School of Medicine
Lines: 33

In article <400@motto.UUCP> murray@motto.UUCP (Murray S. Kucherawy) writes:
>I just got a trailblazer for our MicroVAX II ("motto"), and I'm trying
>to switch from our Hayes-compatible 1200 baud modem to this modem.
>
>But I can't get my trailblazer to work.  It will talk in all the baud rates
>I want it to if I hook up a terminal to it and try it... autobauding
>is fine.  It also answers and connects properly when I dial manually, no
>matter what baud rate.
>
>The problem lies in getting our uVAX to talk to it properly.  We're running
>Ultrix V2.0-1, and it's coming off a port that is was configured at 1200
>baud, and is now configured for 9600 baud.
>
I run VMS, and had some problems until I got my settings right:

S00=001 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=080 S08=002 S09=006
S10=007 S11=050 S12=000 
S45=255 S47=004 S48=000 S49=000
S50=000 S51=005 S52=001 S53=002 S54=003 S55=003 S56=017 S57=019 S58=000 S59=000
S60=000 S61=020 S62=002 S63=001 S64=001 S65=000 S66=001 S67=001 S68=255 
S90=000 S91=000 S92=000 S95=000 
S100=000 S101=000 S102=000 S104=000 
S110=001 S111=255 S112=001 
S120=012 S121=000 

Note that this is for 19200.

Good luck with the Ultrix.

Jeff E Mandel MD MS
Asst Professor of Anesthesiology
Tulane University School of Medicine
New Orleans, LA


Brought to you by Super Global Mega Corp .com