Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!think.com!mintaka!spdcc!jin
From: jin@spdcc.COM (Jerry Natowitz)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Crystal Scan, Diamond Speedstar, and VMODE
Message-ID: <6559@spdcc.SPDCC.COM>
Date: 21 Feb 91 16:20:31 GMT
Organization: S.P. Dyer Computer Consulting, Cambridge MA
Lines: 17

I thought I'd pass along a goodie that I got from Gateway 2000 Tech support
(and it only took 15 minutes to get through :-)

To configure the Diamond Speedstar to drive the Crystal Scan 1024NI select
"custom" as monitor type.
Then for 640X480 select line 1: 31.5 kHz, 60 Hz, and set H/V polarity -/-
         800X600        line 4: 48.1      72                          -/+
         1024X768       line 3: 48.9      60                          +/+

After each option you will have the opportunity to center the display.
When finished the setting will be stored so will only need to add
VMODE CUSTOM to your autoexec.bat
-- 
     Jerry Natowitz
     Guest user on:
ARPA jin@ursa-major.spdcc.com
UUCP {ima,harvard,rayssd,linus,m2c}!spdcc!jin