Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!apple!bionet!ames!dftsrv!heawk1!hoepfner
From: hoepfner@heawk1.gsfc.nasa.gov (Patrick Hoepfner)
Newsgroups: comp.sys.mac.comm
Subject: Re: Help needed: how to save MS Word file to a postscript file
Message-ID: <hoepfner.667444935@heawk1>
Date: 25 Feb 91 01:22:15 GMT
References: <44467@ut-emx.uucp> <eoliver.667435369@hcunix.haverford.edu>
Sender: news@dftsrv.gsfc.nasa.gov
Lines: 11

Yes <Command>-F will give you a PostScript file, but you will have to use
<Command>-K to get the LaserWriter Prep file included into your PostScript# 
file.  This is required because the initialization done to the LaserWriter 
printer is this "LaserWriter Prep" file and the printer attached to another
computer will not have been initailized as the Mac wants it.

--
******************************************************************************
* Patrick Hoepfner                 * Laboratory for High Energy Astrophysics * 
* NASA/Goddard Space Flight Center *              Low Energy Gamma Ray Group * 
* America Online: PatrickH9        * Internet: hoepfner@heasfs.gsfc.nasa.gov *