Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!usc!apple!applelink.apple.com!maller From: maller@applelink.apple.com (Steve Maller) Newsgroups: comp.sys.mac.hypercard Subject: Re: Help: HyperCard has run out of memory. Message-ID: <12209@goofy.Apple.COM> Date: 22 Feb 91 00:02:20 GMT References: Sender: usenet@Apple.COM Organization: Apple Computer Lines: 21 In article Julian.Anderson@comp.vuw.ac.nz (Julian Anderson) writes: > I wish to use the Technical Notes stack on a Mac SE with only 1 Mb > ram, and the TechNotes stack I have is about 1.9 Mb, so hypercard > stops and tells me that it is out of memory. Is there any way for > me to 'cut up' the stack without having to load the whole thing? Nope. The Technical Notes Stack is quite complex, so you will need a bigger machine or more RAM for your SE. By the way, it isn't the size in bytes on disk that makes HyperCard run out of memory. You can open stacks larger than that on a 1-megabyte Mac. Rather, it is the complexity of the scripts and XCMDs that determines the memory requirements. (In 2.0, the physical size of the cards can affect memory, too). -------------------------------------------------------------------- Steve Maller Disclaimer: I speak for neither my Software Commando employer or for Claris HyperCard Engineering Corporation. Apple Computer