Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mnemosyne.cs.du.edu!mercury.cair.du.edu!news From: bdahlen@zephyr.cair.du.edu (Robert L. Dahlen - U. of Denver USA=) Newsgroups: comp.sys.zenith Subject: Re: problem with Zenith 286 as novell workstation Message-ID: <1991Feb26.043414.4426@mercury.cair.du.edu> Date: 26 Feb 91 04:34:14 GMT References: Sender: news@mercury.cair.du.edu (netnews) Distribution: na Organization: University of Denver Lines: 27 In article it1@ra.MsState.Edu (Tim Tsai) writes: > > Hello.. I'm having a little problem with a Zenith AT running Novell's > workstation software.. The computer is setup as follows: > > Zenith 286 machine (probably a model 248, with a very large case and > 512K of memory > PC Dos 3.3 with minimal config.sys and autoexec.bat (files=20, > buffers=20, prompt=$p$g, path=, and a packet driver. That's it) > Zenith EGA Card with 256K of memory (Which emulates EGA on a Hercules monitor) > 40 Meg MFM drive with controller. > 1 1.2 Meg floppy drive. > 1 Serial port set at COM1: (IRQ = 4, Base address = 0x3f8h) > 1 Parallel port set at LPT1: > > Everex Sppedlink PC Ethernet board (8 bit) > Everex's FTP driver, which is based on Clarkson's packet driver. > IPXP (IPX for packet driver) > NET3 (latest version I believe, from Novell) We use a similar setup on Z248's, but are using Arcnet and 3Com and Lanmaster ethernet cards with no problems, for whatever it's worth. -- ------------------------------------------------------------------- Robert L. Dahlen - Director, Information Systems & Technology University of Denver - Denver, Colorado 80208 (303) 871-4385 INTERNET:bdahlen@du.edu BITNET:bdahlen@ducair Brought to you by Super Global Mega Corp .com