Path: utzoo!attcan!uunet!cs.utexas.edu!rice!lub001.lamar.edu!booth
From: booth@lub001.lamar.edu
Newsgroups: comp.unix.ultrix
Subject: Lat print daemon problem
Message-ID: <1991Feb7.093034.1@lub001.lamar.edu>
Date: 6 Feb 91 16:30:34 GMT
Sender: news@rice.edu (News)
Organization: Lamar University - Beaumont
Lines: 53

I am in the process of setting up my first Ultrix/Unix system and am having 
trouble with defining a LAT queue for the system. Here's what I have:

/etc/printcap

lp1|1|line_prn:\
	:af=/usr/adm/lp1acct:\
	:if=/usr/lib/lpdfilters/lg02of:\
	:lf=usr/adm/lperr:\
	:lp=/dev/tty00:\
	:mx#0:\
	:of=/usr/lib/lpdfilters/lg02of:\
	:op=CS_PRINT_132
	:pl#66:\
	:pw#132:\
	:sd=/usr/spool/lpd1:\
	:ts=csts2:\
	:xf=/usr/lib/lpdfilters/xf:

I attempt to start the queue using "lpc start all" and get:

lp1: daemon started
     printing enabled

then I do a "lpc status all" and see

lp1: printing enabled
     queueing enabled
     no entries
     no daemon present

When I attempt to print and then repeat the command "show status" I see:

lp1: queueing is enabled 
     printing is enabled
     1 entry in spool area
     waiting for lp1 to connect

Then I go back to 1 entry in spool area and no daemon present.

I am using Ultrix 4.1 on a DECstation 5000. Connections from a terminal 
server to the system work fine. 

What am I doing wrong?

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
John Booth                          |     Internet - BOOTH@LUB001.LAMAR.EDU
Telecomm Analyst                    |     THEnet   - LUB001::BOOTH
Lamar University                    |     
Beaumont, Texas                     |              POST NO BILLS
(409) 880-8531                      |    
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


Brought to you by Super Global Mega Corp .com