Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!asuvax!ncar!elroy.jpl.nasa.gov!sdd.hp.com!spool.mu.edu!uunet!seismo!dimacs.rutgers.edu!aramis.rutgers.edu!paul.rutgers.edu!njin!njitgw!sensors.njit.edu!elie
From: elie@sensors.njit.edu (Elie I. Mourad)
Newsgroups: comp.lsi.cad
Subject: Bugs in Suprem4 (December 1988 Stanford version)
Message-ID: <2469@njitgw.njit.edu>
Date: 27 Feb 91 22:00:51 GMT
Sender: news@njitgw.njit.edu
Reply-To: elie@sensors.njit.edu (Elie I. Mourad)
Lines: 37

I have run across this problem in Suprem4. (Stanford version, Dec. 1988)

When running the card "diffuse" multiple times. 

For example:
        .
        .
      diffuse time=38 temp=800 wet
        .
        .
      diffuse time=30 temp=1100 nitrogen

Somehow it seems that the nitrogen in the second diffuse is not being
taken into account and wet oxidation occurs.

BUT if I save the structure after the first diffuse, then quit suprem4,
then reenter suprem4, then load in the second part, I get a very different
result. I have a feeling that there is something wrong with the boolean
redefinitions.

Any ideas anyone ? Thanks. Elie.


-- 

                                 ________
________________________________/--------\______________________________________
 
Elie I. Mourad                                       elie@sensors.njit.edu
Dept. ECE/Opto-Electronics                           Work: (201)596-3559       
New Jersey Institute of Technology                   Home: (201)997-8532
University Heights                                   Work FAX: (201)596-6513
Newark, NJ 07102                                     Home FAX: (201)955-1304

                                                     Office: 412T - Sensors Lab
________________________________          ______________________________________
                                \________/