Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!ogicse!decwrl!public!thad
From: thad@public.BTR.COM (Thaddeus P. Floryan)
Newsgroups: comp.periphs.scsi
Subject: Re: Maxtor drive problems (LONG)
Message-ID: <1943@public.BTR.COM>
Date: 27 Feb 91 14:04:24 GMT
References: <493@unixland.uucp> <283400056@adaptx1>
Organization: BTR Public Access UNIX, MtnView CA, Contact: cs@btr.com 415-966-1429
Lines: 19

In article <283400056@adaptx1> neese@adaptx1.UUCP writes:
>
>>One other question:  should "any" electronics parts house carry the 
>>terminators for this drive (in-line pins, 8 pins), or do I need to contact
>>Maxtor?
>
>They are standard SIP resistor terminator packs.  220/120 ohm.

Uh, don't you mean "220/330 Ohm"?

While on this subject, is there an archive site for SCSI material that's
been posted to the Usenet?  Reason I'm asking is that I've a bunch of
goodstuff that I'm reposting every month or so to some other newsgroups
regarding SCSI and that task is becoming arduous, so I'd like to put it
"somewhere" where others can get at it easily.  Suggestions welcome, even
posting to this newsgroup from which an archiver can more-easily grab it
than I could email it.

Thad Floryan [ thad@btr.com (OR) {decwrl, mips, fernwood}!btr!thad ]