Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!sdd.hp.com!caen!news.cs.indiana.edu!msi.umn.edu!noc.MR.NET!ns!ns!guy From: guy@ns.network.com (Guy D'Andrea) Newsgroups: comp.sys.amiga.hardware Subject: Re: AT Bridgeboard and a 2nd Floppy? Message-ID: <1991Mar1.131527.7391@ns.network.com> Date: 1 Mar 91 13:15:27 GMT References: Sender: news@ns.network.com Organization: Network Systems Corporation Lines: 30 Nntp-Posting-Host: ns In article patrick_meloy@outbound.wimsey.bc.ca (Patrick Meloy) writes: >guy@ns.network.com writes: > >>How would someone add a second floppy to the AT Bridgeboard? What about >>adding >>an internal Amiga 3.5" as a B: drive? Since there is not an external >>connector > >You can add a second floppy internally with no trouble so long as you have a >drive bay available. A 1.44 drive just plugs in the same way you would on a >regular AT. > >I was a bit miffed that there was no external floppy connecter on the AT card >until I found out what it would cost to buy an external high density drive! > >--------------------------------------- >| patrick_meloy@outbound.wimsey.bc.ca | >| 'The Outbound' BBS Vancouver BC | >--------------------------------------- Well, I don't need 1.44... just my external drive to run on an AT Bridgeboard! I'd like to create a cable to do this and then run it out the back so I can use my external Amiga drive like I did with my XT Bridgeboard. Anyone? -- Guy Dandrea, Network Systems Corp. // guy@nsco.network.com #129.191.1.1 \\ // 7600 Boone Ave No, Mpls. MN 55428 \X/ 1-800-328-9108 Fax:(612)424-1736 "Me and my Amiga...anything is possible?"