Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!spool.mu.edu!uunet!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.introduction
Subject: Re: Setting up the Workbench screen on 2.0
Keywords: blanker setup 2.0 workbench
Message-ID: <936@cbmger.UUCP>
Date: 27 Feb 91 09:11:12 GMT
References: <1991Feb26.135040.12862@cbnewsk.att.com> <1991Feb26.151406.16389@ncsu.edu>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 15

In article <1991Feb26.151406.16389@ncsu.edu> harris@garfield.catt.ncsu.edu (Michael Harris) writes:
>You can prevent the hide screen by selecting the blanker icon, then select the
>Icons... Information... menu.  Click the "New" button to add the following
>tooltype: "CX_POPUP=NO"  After you type it, press then Enter key, then click
>the Save button.
>
>You can find out all kinds of nifty things if you load the program into a hex
>editor and search for the block where most all the constant strings are kept.

At least with the latest manual revision you don't need such hacks,
just RTFM, it's in there!

-- 
Best regards, Dr. Peter Kittel  // E-Mail to  \\  Only my personal opinions... 
Commodore Frankfurt, Germany  \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk