Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!decwrl!world!unixland!asgardia From: asgardia@unixland.uucp (Craig Rothman) Newsgroups: comp.sys.atari.8bit Subject: Re: P:R: Keywords: comp.sys.atari.8bit Message-ID: Date: 1 Mar 91 06:48:44 GMT References: Sender: bbs@unixland.uucp (Waffle BBS) Organization: The Think_Tank BBS & Public-Access Unix Lines: 26 williams@fquest.fidonet.org (Jason Williams) writes: > Could someone UUencode the P:R: connector handler?I have a friend who > just got a 1200 baud modem for $15 and can't seem to use Bobterm(v.1.21) > > It seems it accepts commands, dials, and everything else, except he can't > see what he's typing(unless he goes into half duplex) and he can't see > anything that's coming in through the modem(but he can see the receive > data light flash on and off).When he types in command state, both the > receive data and transmit date lights flash on and off. > > We've tried setting all the dip switches(in particular, the echo on > switch) and all the S registers. > > > Oh, one more thing, he can't see the OK sign after you type AT > > Any ideas? > > Jason Williams Yes, Is he using a hayes compatible modem? Or something that ISNT fully hayes compatible. Also have you tried to load in a different handler THEN load in bobterm? Another suggestion would be to see if the copy you have of bobterm is somehow flawed.