Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!linac!midway!msuinfo!papa.egr.msu.edu!schultzd
From: schultzd@papa.egr.msu.edu (David Schultz)
Newsgroups: comp.sys.atari.st.tech
Subject: Re: Adjusting the SM124
Message-ID: <1991Feb27.155838.8211@msuinfo.cl.msu.edu>
Date: 27 Feb 91 15:58:38 GMT
References: <27C8984D.9979@ics.uci.edu>
Sender: news@msuinfo.cl.msu.edu
Reply-To: schultzd@papa.egr.msu.edu (David Schultz)
Organization: College of Engineering, Michigan State University
Lines: 23

In article <27C8984D.9979@ics.uci.edu>, ehood@paris.ics.uci.edu (Earl Hood) writes:
|> 
|> Is there anyway to adjust the vertical height on a SM124?  The monitor has
|> no visible buttons on the outside to make the adjustments.
|> 
|> I would like to know if it could be done, because images look slightly
|> scrunched on the screen.
|> 
|> Earl
|> reply to ehood@paris.ics.uci.edu
|> --
|> Earl Hood (UC Irvine) ------------------------------->	ehood@paris.ics.uci.edu

To do this mod, you have to take the casing off the monitor. There are screwdriver adjustable
pots inside that are, for the most part labeled.  You'd probably want a plastic-handled,
well-insulated screwdriver for this (JUST IN CASE YOU LAY THE DAMN THING AGAINST SOMETHING
NASTY!!!!!)

-- 
  |||			   David W. Schultz			   |||
  |||		uunet[!rutgers!mailrus]!frith!schultzd		   |||
 / | \		      Work Phone: (517)-353-8891		  / | \
/  |  \		     "Just gimme a STacy laptop!"		 /  |  \