Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!sdd.hp.com!hp-pcd!hpfcso!steve-t
From: steve-t@hpfcso.FC.HP.COM (Steve Taylor)
Newsgroups: comp.sys.hp
Subject: Re: Talking to HP-HIL bar code reader
Message-ID: <7370321@hpfcso.FC.HP.COM>
Date: 27 Feb 91 02:01:15 GMT
References: <6694@testeng1.misemi>
Organization: Hewlett-Packard, Fort Collins, CO, USA
Lines: 9

In /comp.sys.hp/ tranter@testeng1.misemi (Jeff Tranter) // asks:
| 1. Are the raw keycodes documented somewhere, so that I can convert
|    them to ASCII? If so , where?

Yes.  If it's still available, they're listed in the _HP-HIL Technical
Reference Manual_, HP 45918A.
						Regards, Steve taylor

NOT A STATEMENT, OFFICIAL OR OTHERWISE, OF THE HEWLETT-PACKARD COMPANY.