Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!usc!jarthur!nntp-server.caltech.edu!ptimtc!rdmei!icspub!astemgw!kuis!aegis!davidg
From: davidg@aegis.UUCP (Dave McLane)
Newsgroups: comp.unix.sysv386
Subject: Re: SCSI tape under ISC
Message-ID: <0FH6X2w163w@aegis.or.jp>
Date: 28 Feb 91 21:56:08 GMT
References: <1991Feb23.212932.5348@dsl.pitt.edu>
Organization: Aegis Society
Lines: 18

km@dsl.pitt.edu (Ken Mitchum) writes:

> I would appreciate hearing from anyone who has successfully installed
> a Wangtek 5099 drive with Emulex MT02 controller using the Adaptec
> 1542A under ISC 2.0.2.

It's probably of no use, but I have a 150/250 MB Wangtek (manual 
says 5125PK/5150PK but I don't think that's it and am too lazy to
pull my machine apart to see what it is but it takes 150 MB or 250
MB tapes) as if it were a Wangtek 5099 under ISC V/386 R 3.3 V2.2
and it's OK. My hard disk uses an UltraStor 12F ESDI controller.

As noted in the manual, the default IRQ is 5 which may conflict
with other devices....

Like I said, probably of no use,

--Dave