Path: utzoo!attcan!uunet!wuarchive!sdd.hp.com!news.cs.indiana.edu!ariel.unm.edu!nmsu!opus!owhite From: owhite@nmsu.edu (smouldering dog) Newsgroups: sci.electronics Subject: anyone with experience with TEC-200 film for pcb's?? Message-ID: Date: 11 Feb 91 16:26:30 GMT Sender: news@NMSU.Edu Distribution: sci Organization: Computing Research Lab Lines: 21 I was looking in the recent edition of radio electronics, march '91 pg 52oo and in an advertisement from DC electronics (scottsdale AZ) there is a description for a method of pcb fabrication that goes like this: -copy circuit pattern on TEC-200 film using any plain paper copier. -iron film onto copper clad board. -peel off film and etch. has anybody had any experience with this stuff? it sounds reasonably useful. I would be particularly interested in it if you can run the TEC-200 thru a laser printer and if it doesn't require specialized copper-clad boards. I would guess that other sci.electronic netters would like to hear your experiences so why not post on the net? -- owen white (owhite@nmsu.edu) -=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-*-=-=-*-=- got my head on a pole (for better reception) -=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-=-*-=-*-=-=-*-=-