Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!zephyr.ens.tek.com!tektronix!reed!intelhf!ichips!inews!iwarp.intel.com!gargoyle!igloo!ddsw1!olsa99!frcs!paul From: paul@frcs.UUCP (Paul Nash) Newsgroups: comp.dcom.modems Subject: Re: MultiTech MultiModem V32 & T2500 Keywords: MultiModem V32, T2500 Message-ID: <408@frcs.UUCP> Date: 5 Mar 91 06:34:34 GMT References: <148@ipars.UUCP> Organization: Free Range Computer Systems CC Lines: 18 Thus spake scotto@ipars.UUCP (Scott O'Connell): > I have just taken over a network with several MultiTech MultiModem V32 > modems. I have been using Telebit T2500's and now need to make the two > flavors of V32 talk consistantly. I have had a similar problem, and found that the only way to make the MultiTech talk to the TB reliably was by disabling MNP (error correction _and_ compression) on the TB. Like this, it works fine. The TB has always called the MultiTechs reliably, but they just won't connect properly if the TB tries to negotiate error correction. Your mileage may vary. ---=---=---=---=---=---=---=---=---=---=---=---=---=---=---=---=---=--- Paul Nash Free Range Computer Systems cc paul@frcs.UUCP ...!uunet!m2xenix!frcs!paul