Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!mips!twg.com!frank
From: frank@twg.com (Frank McConnell)
Newsgroups: comp.os.cpm
Subject: Wanted: Shugart SA860 drive info
Summary: need power connector info
Message-ID: <8713@gollum.twg.com>
Date: 6 Mar 91 17:50:27 GMT
Organization: The Wollongong Group, Palo Alto, CA
Lines: 21

I picked up a few SA860 drives as spares a while back; these are
half-height 8" drives, and as such don't have the nice hefty 110 VAC
motors found in canonical full-height drives.  Instead, these drives
look much like what PC 5.25" half-heights aspire to be when they
grow up, with a bigger version of the "flat" spindle motor and a 
quarter-turn handle to "close" the drive.

I now would like to use these to replace a pair of SA850 full-height
drives.  The problem is, these drives have a single power connector
that is different from either of the two on the 850s, and of course
I have no service or installation manual for the 860s :-(.
  
Does anyone out there have info on what the power connector expects?
Or, perhaps, pointers on where I could get the documentation for the
drives?  (Or even tales of terror about the troubles I'm asking for!)

Feel free to mail me; I'll summarize mailed responses.

Thanks in advance!

-Frank McConnell "I want my MPE"  E-mail: <FRANK@TWG.COM> Tel: +1 415 969 3770