Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!evax!utacfd!merch!cpe!adaptex!adaptx1!neese
From: neese@adaptx1.UUCP
Newsgroups: comp.periphs.scsi
Subject: Re: <1943@public.BTR.COM>
Message-ID: <283400063@adaptx1>
Date: 5 Mar 91 09:08:21 GMT
References: <1943@public.BTR.COM>
Lines: 17
Nf-ID: #R:public.BTR.COM:1943:adaptx1:283400063:000:523
Nf-From: adaptx1.UUCP!neese    Mar  4 13:27:00 1991


>/* ---------- "Re: Maxtor drive problems (LONG)" ---------- */
>In article <283400056@adaptx1> neese@adaptx1.UUCP writes:
>>
>>>One other question:  should "any" electronics parts house carry the 
>>>terminators for this drive (in-line pins, 8 pins), or do I need to contact
>>>Maxtor?
>>
>>They are standard SIP resistor terminator packs.  220/120 ohm.
>
>Uh, don't you mean "220/330 Ohm"?

You are right.  Thanks for keeping me honest.

			Roy Neese
			Adaptec Senior SCSI Applications Engineer
			UUCP @  neese@adaptex