Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!ukc!mucs!liv-cs!liv!scst86
From: SCST86@LIVERPOOL.AC.UK
Newsgroups: comp.sys.acorn
Subject: Re: Upgrading the RAM
Message-ID: <91063.110842SCST86@LIVERPOOL.AC.UK>
Date: 4 Mar 91 11:08:42 GMT
References: <1991Feb6.143949.19191@cbnewse.att.com> <1991Feb25.003217.20977@garfield.cs.mun.ca>
Organization: University of Liverpool
Lines: 20

Hi There,
   Reguarding upgrading the RAM on a 310:-

   I can recommend the Ifel upgrades. I purchased the 4Mb version and, taking
my life in my hands, did the upgrade myself. It's a relatively easy to do. You
have to remove 3 chips (which you don't have to keep so you can clip them out),
and solder sockets into their place. This is basically it. You turn the machine
on, it says '4096k' and whoosh.......

   The build quality of the board is quite good and the instructions are very
well done.

   I bought the board (4Mb) for `350. Not bad eh?

Jason Timmins                My Card.... +-------------------------+
Dept. Of Computer Science,               |                         |
University Of Liverpool.                 |      Jason Timmins      |
JANET: SCST86@UK.AC.LIV.IBM              |  (I can waggle my ears) |
   OR: SCST86@UK.AC.LIV.UXA              |                         |
 TELE: (UK) 0860 600 758                 +-------------------------+