Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!apple!netcom!barry
From: barry@netcom.COM (Kenn Barry)
Newsgroups: comp.sys.amiga.graphics
Subject: Re: DCTV
Message-ID: <27264@netcom.COM>
Date: 7 Mar 91 18:08:08 GMT
References: <DSWYJ7T@cs.swarthmore.edu> <27019@netcom.COM> <anderson.668252965@mrcnext>
Organization: QQQCLC
Lines: 23

In article <anderson.668252965@mrcnext> anderson@mrcnext.cso.uiuc.edu writes:
>I have a NEC-3D and flickerFixer board.  I also use a switch box and a cable
>I purchased from Redmond Cable to choose between sending the flickerFixed 
>output to the NEC or good 'ol 23pin Amiga RGB.
>
>The NEC does not have composite in.  Just the 9 (or 15 w/o converter) pin
>RGB type input.
>
>Is DCTV totally out of the picture for a setup like this?
>With the NEC-3D is there any way of using DCTV?

	I think you could use DCTV with your Amiga, but you
couldn't send the output to your NEC. You'd need a separate,
composite monitor for DCTV's output. An ordinary TV would
probably do, long as it had an RCA-type, composite-in jack.

>Next question:
>
>Have you seen Firecracker?

	Sorry, no.

						Kayembee