Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!usc!snorkelwacker.mit.edu!bloom-beacon!eru!hagbard!sunic!enea!tope From: tope@enea.se (Tommy Petersson) Newsgroups: comp.sys.amiga.hardware Subject: Re: Multisync and Colorburst Keywords: NEC and Colorburst Message-ID: <2743@enea.se> Date: 5 Mar 91 12:00:53 GMT References: Organization: Enea Data AB, Sweden Lines: 22 In article <5666@tahoe.unr.edu- tucker@tahoe.unr.edu (Aaron Tucker) writes: -In article undrground!bryanh@amix.commodore.com (Bryan Harpel) writes: -> -> I have a question about the colorburst hardware. Will it be compatible ->with a multisync monitor (like the NEC 3D). The reason that I ask is ->because they only advertise it as working with the 1084 series RGB ->monitors, and I am not sure it multisync are considered 'RGB'. Thanx. -> - -Colorburst emulates pin-2-pin, the RGB port. Anything you can normally hook -up to the Amiga's RGB port, you can hook up to Colorburst. - -Juan Trevino -Modern Media Does it give a 15.75 KHz frequency only, or 30? Most new colour monitors with high resolution (1024x768 or 1280x1024) are from 30-64 or 30-75. How about other cards, like FireCracker and Harlequin? Tommy Petersson tope@enea.se