Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!ub!ubvmsd.cc.buffalo.edu!v089pfrb
From: v089pfrb@ubvmsd.cc.buffalo.edu (Jeffrey C Murphy)
Newsgroups: comp.sys.amiga.misc
Subject: Re: A new A2000
Message-ID: <62998@eerie.acsu.Buffalo.EDU>
Date: 4 Mar 91 05:11:44 GMT
References: <46431@nigel.ee.udel.edu>
Sender: news@acsu.Buffalo.EDU
Reply-To: v089pfrb@ubvmsd.cc.buffalo.edu
Organization: University at Buffalo
Lines: 28
Nntp-Posting-Host: ubvmsd.cc.buffalo.edu
News-Software: VAX/VMS VNEWS V1.3-4.4

In article <46431@nigel.ee.udel.edu>, PFREY%DREW.BITNET@cunyvm.cuny.edu (PETER C. FREY) writes...
>How do I reconfigure the keyboard so that I can use another key as a return
>key, and is it possible to get two new cords?  If so, how much would they cost
>and where could I get them?

 I don't know how adventurous you are, but... I had a similar problem with a 
few other keys (I'm probably going to get an omnikey keyboard -- some guys
across the hall have them and I really like its feel) and this is the
solution that my local dealer gave me:
   1  Pop the key off with a screw driver
   2  Pop the small white cap off (under the key) by pressing the bottom of it
     in.
   3  Press the two small contacts together (apparently they get fatigued
     after a time) several times.
   4  Replace the white cap and the key.
 This should work (temporarily) I still have trouble every now and then.

>On another note, I would like to upgrade my rom to 1.3 or 2.0.  I also would
>like to know ANY info one might have on the ProDraw or Disney Animation.

 2.0 isn't quite out yet in rom (soon though).
 No experience with either progs...

>                                        Thanks to all,
>                                                - Peter C. Frey
>                                                  PFREY@DREW.BITNET

J Murphy