Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!ccut!wnoc-tyo-news!scslwide!wsgw!pcgw!samba From: samba@sm.sony.co.jp (Masaaki Hoshino) Newsgroups: comp.sys.novell Subject: Re: ??? Compaq33L & Advanced 2.15C problems, cpu's meter faulty ??? Summary: 486 & Advanced 2.15C problems, cpu's meter faulty ??? Message-ID: <1298@pcgw.sm.sony.co.jp> Date: 5 Mar 91 02:23:00 GMT References: <26593@neptune.inf.ethz.ch> Organization: Sony Corporation, Super Micro Group, PC Division, Tokyo, Japan Lines: 38 In article <26593@neptune.inf.ethz.ch>, aprzygie@iiic.ethz.ch (Antoni Bronislaw Przygienda) writes: > I lately installed a net (Advanced Netware 2.15) with a COMPAQ 386/33L as > server (Novell NE2000 in it). Questions: > > 1) the server runs for 4 or 5 days normally & stops! The screen is > still active, but it shows no reaction on any keyboard input. > After reboot it works for another 4 or 5 days. The funniest thing > is, it doesn't fail under heavy load, but at almost no load > (4 or 5% & someone listing a directory for example). > I heard several theories from people who installed a lot of > Netware before (incl. the Novell dealer): > 2) the "monitor"'s cpu-load-meter goes crazy. It shows first a > couple of asteriks & then a load of 170% and more ?! When I > slows the compaq by 30% it behaves normally. I looks strongly > the way as if the meter would have been tested up to machines > with 25MHz by Novell (although I can't really believe it) & > has kind of a time-loop in it overflowing on faster ones. > > Some hints ?? I'll resume for the net > I have same problems in Advanced 2.15C with the following machine. Compaq DeskPro 486 25MHz Sony PCX-700 486 33MHz The DOS Process on Server is very slow and no reaction on any keyboard input, when server is no load. And also the CPU meter ( Utilization = ** % ) goes crazy, it indicate 170% ,230 % or etc. These troubles doesn't occur under heavy load. When I slow the 486(CPU Cash off), it behaves normally. Masaaki Hoshino Sony corp. Tokyo Japan. samba@sm.sony