Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!sco!md From: md@sco.COM (Michael Davidson) Newsgroups: comp.unix.sysv386 Subject: Re: AST four-port switch settings Message-ID: <10619@scolex.sco.COM> Date: 6 Mar 91 18:41:03 GMT References: <1991Mar2.034504.10735@cfctech.cfc.com> Sender: news@sco.COM Lines: 17 davidg%aegis.or.jp@kyoto-u.ac.jp (Dave McLane) writes: >alexb@cfctech.cfc.com (Alex Beylin) writes: >> Could someone please send me the switch settings for the >> AST 4-port board (early version, SN 4889). I used to have a manual >> for this card in one of the boxes... >> >> It will be used in a system with i386 2.2. and fas async driver. >While you're at it could you tell me where I can get such a board? JDR Microdevices in San Jose (sorry don't have their address, but they advertise in several PC magazines) - sell a 4 port card under the "MCT" (Modular Circuit Technology) brand name that is an AST 4 port clone. Make sure you ask for the "multiuser" card - they also have some other dumb 4 port cards that are not AST clones. Last I heard they were selling these cards for about $195.