Path: utzoo!news-server.csri.toronto.edu!rutgers!apple!decwrl!uunet!cbmvax!grr
From: grr@cbmvax.commodore.com (George Robbins)
Newsgroups: comp.unix.ultrix
Subject: Re: 2 questions: setld format, and vmunix vs. genvmunix
Message-ID: <19517@cbmvax.commodore.com>
Date: 5 Mar 91 05:56:52 GMT
References: <74430@bu.edu.bu.edu> <2493@shodha.enet.dec.com> <1991Mar4.140524.6291@mlb.semi.harris.com> <1991Mar4.202551.11844@mlb.semi.harris.com>
Reply-To: grr@cbmvax.commodore.com (George Robbins)
Distribution: usa
Organization: Commodore, West Chester, PA
Lines: 24

In article <1991Mar4.202551.11844@mlb.semi.harris.com> pjp@sloth.mlb.semi.harris.com (Pat J. Pinchera) writes:
> newsgroups: comp.dcom.modems,comp.sys.dec,comp.unix.ultrix
> Subject: dialer entry (/etc/acucap) for Practical Peripherals 2400 SA
> Sender:  Patrick J. Pinchera
> Followup-To: 
> Distribution: 
> Organization: Interface & Control Systems, Inc.
> Keywords: /etc/acucap, Practical Peripherals 2400 SA, Ultrix
> 
> I'm trying to setup a Practical Peripherals 2400 SA modem on a
> DECstation 3100 running Ultrix 4.1. In trying to dial out using the
> 'tip' command, the modem dials, and connects, but the 'tip' program
> does not wait and responds with 'connect failed'. I've been modifying
> a copy of the Hayes-V entry on the /etc/acucap file.

Check that the modem is set up for "real" modem status signals, since
the acucap sequence probably expects to see cd change, not be always
enabled.


-- 
George Robbins - now working for,     uucp:   {uunet|pyramid|rutgers}!cbmvax!grr
but no way officially representing:   domain: grr@cbmvax.commodore.com
Commodore, Engineering Department     phone:  215-431-9349 (only by moonlite)