Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!bruce!monu0.cc.monash.edu.au!monu1!vaxc.cc.monash.edu.au!hadgraft
From: hadgraft@vaxc.cc.monash.edu.au (Hadgraft)
Newsgroups: comp.windows.ms
Subject: Re: netware and windows, when to login?
Message-ID: <1991Mar4.170931.86394@vaxc.cc.monash.edu.au>
Date: 4 Mar 91 07:09:31 GMT
References: <26054@rouge.usl.edu>
Followup-To: comp.dcom.lans
Lines: 21

In article <26054@rouge.usl.edu>, pcb@basin04.cacs.usl.edu (Peter C. Bahrs) writes:
> I know the manual said to login to netware before you bring up windows.
> But if I don't and bring up a window.pif and goto f: and login it
>    1) works fine on my compaq running just netware
>    2) does not work on my ps2 70 using packet drivers.
>
> What I mean by does not work is my path does not get set.  If I type
> map, the search paths are set but if I type set, the path is not
> updated.
>
Have you tried the "Attach file server" option which is accessible through the
Network option in Control panel? It seems to work for me, although I didn't
check the Path.
--
  +--------------------------------------+
  |  Roger Hadgraft                 +----------------------------------+
  |  Senior Lecturer                |  hadgraft@civeng.monash.edu.au   |
  |  Dept of Civil Engineering      |  phone:  +61 3 565 4983          |
  |  Monash University              |  fax:    +61 3 565 4944 or 3409  |
  |  Clayton, Vic. 3168. Australia. +----------------------------------+
  +--------------------------------------+