Xref: utzoo comp.periphs:3535 comp.sys.ibm.pc.hardware:6271
Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!uwvax!zazen!wuarchive!sdd.hp.com!news.cs.indiana.edu!att!cbnewsj!felixc
From: felixc@cbnewsj.att.com (felix.cabral)
Newsgroups: comp.periphs,comp.sys.ibm.pc.hardware
Subject: SCSI Host
Message-ID: <1991Mar7.214923.17697@cbnewsj.att.com>
Date: 7 Mar 91 21:49:23 GMT
Followup-To: poster
Distribution: usa
Organization: AT&T Bell Laboratories
Lines: 20


Does anyone out there have a scsi host card with:
	- Floppy and Hard drive connections
	- 16 bit interface
	- AND MOST IMPORTANT uses I/O port addresses in the 300 range

I have an Always 2000 which is a very nice card. It has all the above items
except the last. Its I/O port address range is in the 100 and 200 locations
Though I can configure the adress at multiple settings but all within these
ranges (100/200).

I have an application which will only run when the host card is in the 
300-3e8 range.

If you do what is the make an model number. Thanx in advanced.

-- 
Felix Cabral         {felixc@mtgzz.att.com}      "Just give me a rad 
AT&T Bell Labs       {  att!mtgzz!felixc  }       wave, a rad board and 
Middletown,NJ        {    (201)957-5081   }       a company sick day"