Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!sdd.hp.com!spool.mu.edu!uunet!tnc!m0154
From: m0154@tnc.UUCP (GUY GARNETT)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Modems won't connect!
Message-ID: <751@tnc.UUCP>
Date: 11 Mar 91 15:09:17 GMT
References: <91069.164621JKT100@psuvm.psu.edu>
Reply-To: m0154@tnc.UUCP (GUY GARNETT)
Organization: The Next Challenge, Fairfax, Va.
Lines: 41


Hayes compatible dialing commands

AT   ---- begins any modem command
  A   --- Answer incoming call
  D   --- Dial command 
   P   -- Pulse (rotary) dialing
   R   -- Reverse (dial and go into answer mode)
   T   -- Tone (touch-tone) dialing
   W   -- Wait for dial-tone
   @   -- Wait for quiet line
   ,   -- Pause
   ;   -- Return for next command after dialing
   !   -- Flash hook switch
   0-9 -- Dial a digit
   ()- -- Do nothing (no effect)
  H   --- Hook switch control
   0   -- On-hook (hang up phone)
   1   -- Off-hool (pick up phone)
  L   --- Speaker level
   0-3 -- Volume for speaker (0==Low,3=High)
  X   --- Extended Options
   0   -- Basic; dial w/o dialtone, don't recognize busy, no speed
   1   -- As above, but gives speed info at connect (ex: CONNECT 1200)
   2   -- As #1 above, but wait for dialtone before dialing
   3   -- As #1 above, but detect busy signal
   4   -- All Features; wait for dialtone, detect busy, give speed
  Z   --- Reset to power-on defaults
A/   ---- Repeat last command

String the command letters together to make it do what you want:

To dial out:

ATZ             Resets modem
ATDT5551212     Dial (touch-tone) the number 555-1212
ATX4DT7654321   Setup to wait for dialtone before dialing, detect a
                busy signal, and give speed info.  Then dial 765-43231
ATA             Answer the phone (and try to connect)

Wildstar