Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!hp-pcd!hpcvlx!harry
From: harry@hpcvlx.cv.hp.com (Harry Phinney)
Newsgroups: comp.sys.hp
Subject: Re: Disabling <cnrtl><shift><reset>
Message-ID: <101950191@hpcvlx.cv.hp.com>
Date: 12 Mar 91 01:27:36 GMT
References: <91491@tut.cis.ohio-state.edu>
Organization: Hewlett-Packard Co., Corvallis, OR, USA
Lines: 18

Keith M Boyer writes:
> Perhaps I was not as clear as I should have been. The MIT X11R4 Server does
> not have the XHP* extensions in it. Using the X11R4 Xlib does not provide any
> obvious way of keeping this key sequence from terminating the X server.

This is quite true.  I know of no way to disable the key sequence in the
server distributed on the MIT tape.  My suggestion is to retrieve
either:

hpcvaaz.cv.hp.com:~ftp/pub/XServers/X.7.03.300.Z

or

hpcvaaz.cv.hp.com:~ftp/pub/unsupported/XServers/X.R4.800.Z

Both of these support the XHP extensions.

Harry Phinney   harry@hp-pcd.cv.hp.com