Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!modus!gear!wolf!p13.f602.n332.z2.FIDONET.SUBLINK.ORG!Virgilio.Vincenzo
From: Virgilio.Vincenzo@p13.f602.n332.z2.FIDONET.SUBLINK.ORG (Virgilio Vincenzo)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: 2 floppy drives on one controller
Message-ID: <5243.27D8217D@wolf.fidonet.sublink.org>
Date: 7 Mar 91 11:25:31 GMT
Sender: ufgate@wolf.fidonet.sublink.org (newsout1.26)
Organization: FidoNet node 2:332/602.13 - WolfNet SDN #563.01, Pisa Italy
Lines: 14



I have had a similar experience.
Make sure that neither of drive is also configured as drive 1 (or 2 or 3) because twistling the cable you will make it drive 0!!!
For this look to a jumper setting on the drive itself.

Xiao Vinc.


--  
 WolfNet BBS Pisa (Italy) Tel. +39-50-589050 300-14.4K Baud Matrix 2:332/602.0
 Virgilio Vincenzo - via FidoNet node 2:332/602
 UUCP: ...!gear!wolf!602.13!Virgilio.Vincenzo
 ARPA: Virgilio.Vincenzo@p13.f602.n332.z2.FIDONET.SUBLINK.ORG