Xref: utzoo comp.sys.ibm.pc.misc:7288 comp.sys.ibm.pc.hardware:6326
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!caen!news.cs.indiana.edu!valnet!herrj
From: herrj@valnet.UUCP (Jonathan R. Herr)
Newsgroups: comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware
Subject: ST251-1 with bad track 0
Message-ID: <so9Jy1w163w@valnet>
Date: 9 Mar 91 21:10:51 GMT
Organization: Valley BBS Network
Lines: 27
Disclaimer: Author responsible for contents

In reference to the above subject, I am trying to figure out how to
go about installing it.  I posted once but it seems that my post
didn't make it out due to system problems.

Here's some info:

   Machine:	Protek XT clone
   OS:		MS-DOS 4.01
   Drives:	Seagate ST225 (works fine)
   		Seagate ST251-1 (with bad track 0, not installed)
   		360K floppy
   Controller:	Western Digital WD1004A-WX1 Winchester Disk
                Controller Board

I've downloaded the file TRAK0BAD.ARC from wuarchive and I realize
that it is still usable, but it mainly deals with drives that already
exist in a machine.  Should I just do a low-level format and use the
fdisk program to partition it accordingly?

Thanks in advance for any help.

   					== Jon ==

Jonathan R. Herr				FitchMeyer Enterprises
herrj@valnet.uucp				CompSci BBS SysAdmin
             CompSci BBS  +1 812 876-4407 3/12/2400
              free access to Usenet and UUCP email