Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!wuarchive!psuvax1!hsdndev!cmcl2!uupsi!pyro!bell
From: bell@pyro.ei.dupont.com (Mike Bell)
Newsgroups: comp.sys.mac.comm
Subject: Re: EtherTalk Peek
Keywords: EtherTalk, peek
Message-ID: <1991Mar8.141922.21806@pyro.ei.dupont.com>
Date: 8 Mar 91 14:19:22 GMT
References: <2136@riddler.tegra.COM>
Organization: DuPont Electronic Imaging
Lines: 54

In article <2136@riddler.tegra.COM> mcdougal@riddler.UUCP (Steve W McDougall) writes:
>We are having problems with an EtherTalk (phase II) application.
>It looks like its about time to get down into the bits with Peek.
>
>Is there Peek for EtherTalk phase II?
>Does it exist?  Can I get it?  Can I buy it?
>
>Barring an existing Peek utility, is there a driver that will let
>my EtherTalk cards accept packets sent to any EtherNet address?
>We are using 3COM EtherLink II and GatorCards.
>If I just had the packets, I could interpret them myself.
>Are there interface specs for these drivers?
>
>If there are no drivers, are there cards that can be configured
>to accept packets sent to any EtherNet address?
>Are there interface specs for these cards?
>
>Any pointers will be greatly appreciated.




  The best program (by Far) is EtherPeek from the AG Group. They are very 
helpful, and actually add features that are requested by customers !!
They can be reached at   415-937-2479.





			Mike BEll



-- 




********************************************************************************
     
Mike Bell                                Internet: bell@opus.wizards.dupont.com
Senior Engineer                          CSNet: BELLMA%ESVAX@dupont.com
DuPont CR&D  				 Applelink: D2747
Advanced Computer Technology Group

"We're in the Computer Business......we sell connectors !!
					
				-- C. S.

********************************************************************************


--