Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!elroy.jpl.nasa.gov!ncar!csn!huntting
From: huntting@colorado.edu
Newsgroups: news.software.b
Subject: Re: tuning number of inodes for cnews
Message-ID: <1991Mar10.035342.14226@csn.org>
Date: 10 Mar 91 03:53:42 GMT
References: <1991Mar1.230651.4574@NPIRS.Purdue.EDU> <1991Mar3.001647.18652@zoo.toronto.edu> <50435@olivea.atc.olivetti.com>
Sender: huntting@csn.org (Brad Huntting)
Reply-To: huntting@colorado.edu
Organization: Colorado SuperNet Inc.
Lines: 17

jerry@olivey.ATC.Olivetti.Com (Jerry Aguirre) writes:

>I run 398MB and 141K inodes, about the same ratio.  In general 1
>inode per 2K bytes should be about right.

>The problem is that sometimes you don't get as many inodes allocated as
>you expect, even less than the default value.

Yeow!  Can someone enlighten me on how you check the number of inodes
and data blocks under ultrix 4.1?

I'm bringing up a DS3100 with a wrenV (one spool partition)...


brad
	huntting@colorado.edu
	huntting@csn.org