Path: utzoo!news-server.csri.toronto.edu!rutgers!usc!sdd.hp.com!spool.mu.edu!uunet!olivea!oliveb!amdahl!JUTS!duts!kls30 From: kls30@duts.ccc.amdahl.com (Kent L Shephard) Newsgroups: sci.electronics Subject: Re: DIG AUDIO: AES to IBM ??? Message-ID: Date: 12 Mar 91 21:32:06 GMT References: <1991Mar6.234309.3198@vax5.cit.cornell.edu> Sender: netnews@ccc.amdahl.com Reply-To: kls30@DUTS.ccc.amdahl.com (Kent L. Shephard) Distribution: na Organization: Amdahl Corporation, Sunnyvale CA Lines: 23 In article <1991Mar6.234309.3198@vax5.cit.cornell.edu> cpyy@vax5.cit.cornell.edu writes: >Does anyone out there have any suggestions on >how to bring AES (from a DAT) into an IBM. >Since AES uses Manchestor encoding, it would >be too hard for me to build a ser-to-par converter. > >Maybe there exists some chip? > -Jon > cpyy@vax5.cit.cornell.edu I too would also like suggestions, but my application is a little different. I would like to take an AES/EBU format signal from a DAT and send it to a NeXT. What is the format for AES/EBU. The NeXT has a 56000 family DSP that expects digital input and generates digital output in a multiplexed data stream. That is one bit left then one bit right. Thanks, Kent -- /* -The opinions expressed are my own, not my employers. */ /* For I can only express my own opinions. */ /* */ /* Kent L. Shephard : email - kls30@DUTS.ccc.amdahl.com */