Path: utzoo!attcan!uunet!mcsun!unido!hwsw!hwsw.gedas.de!rainer
From: rainer@hwsw.gedas.de (Rainer Raupach)
Newsgroups: comp.dcom.lans
Subject: Re: 802.3 for NetWare for VMS
Keywords: 802.3 / Ethernet II
Message-ID: <771@hwsw.gedas.de>
Date: 28 Feb 91 08:44:21 GMT
References: <755@hwsw.gedas.de> <604.27c8f10d@inland.com>
Sender: news@hwsw.gedas.de
Reply-To: rainer@hwsw.gedas.de (Rainer Raupach)
Organization: VW-GEDAS BERLIN
Lines: 19

>There is a utility - ECONFIG - that will modify Netware Shells and Servers
>to talk Ethernet-II. If you need your workstations and servers to communicate
>with NW-VMS, you will want to change them.

Ok, I know this utility and already used it to configure our Novell-gateway
to have access to both groups. But I thought it might be easier to change
4 VAXen rather than econfig 250 PCs.

Ok, let`s assume, I econfig all the workstations and servers. Will the
change do anything to the EtherTalk / IPX - gateway?
What kind of packets are EtherTalk packets?

Rgds Rainer

-- 
---
Rainer Raupach		Internet: rainer@hwsw.gedas.de
Network Coordinator	X.400:	too long to display here
VW-GEDAS Berlin, GER 	Phone:	+49 30 39007-629  / FAX : ext -999