Path: utzoo!attcan!uunet!decwrl!sdd.hp.com!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!pacbell.com!tandem!netcom!gandrews
From: gandrews@netcom.COM (Greg Andrews)
Newsgroups: comp.dcom.modems
Subject: Re: Fastlink Problem (was: T2500 and Hayes V series)
Summary: Shouldn't do that - have latest firmware?
Message-ID: <26168@netcom.COM>
Date: 28 Feb 91 08:41:53 GMT
References: <22621@hydra.gatech.EDU> <25352@netcom.COM> <28@grout.UUCP>
Followup-To: comp.dcom.modems
Organization: Netcom - Online Communication Services  UNIX System {408 241-9760 guest}
Lines: 19

In article <28@grout.UUCP> mark@grout.UUCP (Mark Oberg) writes:
>
>As soon as the Fastlink hears the V.22bis tones it goes into V.22bis 
>mode and will not make a PEP connect.  If I set S50=255 to force PEP 
>connections the modem will disconnect immediately upon hearing the 
>V.22bis tones.
>

It's definitely not supposed to happen like that.  The last version
of firmware for the TrailBlazer/Fastlink/etc./etc. platform was
AA3.01-AB3.00.  Do you have that version? 

Probably best to call Telebit tech support and have your modem checked
out...

-- 
.-------------------------------------------.
| Greg Andrews      |   gandrews@netcom.COM |
`-------------------------------------------'