Path: utzoo!news-server.csri.toronto.edu!ois.db.toronto.edu!chen
Newsgroups: comp.dcom.modems
From: chen@db.toronto.edu (Chenhui Wang)
Subject: T2500 <=> HST troubles...
Message-ID: <91Mar16.083752est.2069@ois.db.toronto.edu>
Organization: Department of Computer Science, University of Toronto
Distribution: na
Date: 16 Mar 91 13:38:06 GMT
Lines: 21

Hi, Everybody:

	I have a T2500, and for some means, I can not communicate with a
USRobotics HST (I think it is a 9600 bps modem). Unfortunately, the HST
does not have V.32. but I could not even communcate with the HST at 2400
baud! I could connect at 2400 (CONNECT 2400), but then there are large
amount of strange symbols appearing on my screen (line noises??). But when
I connect the T2500 to another Telebit modem in my school, there were no
strange symbols.

	I used the conventional command set on the manual (AT~&F1). The T2500,
after connected with the HST at 2400 baud, could only transfer files at ~130
cps, because of the "line noises", the transfer protocol have to send the
packet a number of times to get it through.

	I am no modem expert. So any help will be appriciated.

	Chen Wang

chen@db.toronto.edu
chen@db.utoronto.ca