Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!mips!pacbell.com!ucsd!network.ucsd.edu!network!bill
From: bill@inls1.ucsd.edu (Bill Reynolds)
Newsgroups: comp.dcom.modems
Subject: Re: DSZ ZMODEM problem
Message-ID: <BILL.91Mar17185752@inls1.ucsd.edu>
Date: 18 Mar 91 02:57:52 GMT
References: <9857@jjmhome.UUCP> <1991Mar16.190010.21805@cs.wayne.edu>
	<3811@gmuvax2.gmu.edu>
Sender: news@network.ucsd.edu
Followup-To: comp.dcom.modems
Organization: University of California, San Diego
Lines: 30
Nntp-Posting-Host: inls1.ucsd.edu
In-reply-to: esaffle@gmuvax2.gmu.edu's message of 17 Mar 91 23:08:47 GMT

In article <3811@gmuvax2.gmu.edu> esaffle@gmuvax2.gmu.edu (Ed Saffle) writes:

   >	I started the sending in unix and go to Procomm Plus and initialize
   >	the receiving and I got timeouts and had to abort the transmission.

	   I seem to have the same problem, but only across the phone lines.  I
   dial into a BBS when I am at home and no problem.  I can also start transfers
   between our mainframe and a UnixPC via direct connect serial cable and it'll
   start just fine and work for a little while....but then it starts getting
   the same errors.  I blame the last one, however, on the networking.  It 
   might not be though.

   Please E-mail any advice to:
	   esaffle@gmuvax
	      or
	   esaffle@gmuvax2.gmu.edu

   Thanks,
     Ed


Here's the switch I put on my sz that allows it to download to a pc
over the phone lines. (I still can't get it to upload though).

	alias sz	(sz -l 1024)

--
_______________________________________________________________________
WOOOOOOOH!					|  Bill Reynolds
	   -Mick Jagger			 	|  bill@inls1.ucsd.edu