Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!think.com!mintaka!ogicse!intelhf!agora!billsey
From: billsey@agora.rain.com (Bill Seymour)
Newsgroups: comp.periphs.scsi
Subject: Re: rll->scsi?
Message-ID: <1991Mar13.191849.18654@agora.rain.com>
Date: 13 Mar 91 19:18:49 GMT
References: <91056.120608KELLYDK@QUCDN.QueensU.CA>
Organization: Open Communications Forum
Lines: 22

KELLYDK@QUCDN.QueensU.CA (Doug Kelly) writes:
: Sorry to ask something that has probably been covered before, but
: what is the best way to connect an RLL drive up to a SCSI bus?
: I know that Adaptec used to make an adaptor - what is the part number,
: and does anyone else make anything similar?  ( if it matters, I'm
: currently using an OMTI 55?? controller)
: 
: Doug Kelly
: kellydk@qucdn.queensu.ca

	A couple of the most popular ones... The Adaptec ACB-4070 is an
RLL to SCSI card, 5.25 inch form factor. You'll want to mount in such a
way that you have good shielding between the drive and Adaptec though,
since they're prety succeptable to noise. Another is the OMTI 3527, a
3.5 inch form factor RLL to SCSI card. This one is fairly nice, but can
be zapped fairly easily from static or miswired cables.

-- 
     -Bill Seymour                billsey@agora.uucp or billsey@agora.rain.com
*****   American People/Link  Amiga Zone Hardware Specialist   NES*BILL  *****
Bejed, Inc.     NES, Inc.        NAG BBS         NES BBX BBS    Home Sometimes
(503)281-8153   (503)246-9311   (503)656-7393   (503)640-9337   (503) 640-0842