Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!ukc!mucs!logitek!alanh
From: alanh@logitek.co.uk (Alan Hourihane)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: PC/TCP Generic & PC-Xview/16
Message-ID: <alanh.668865698@krypton>
Date: 13 Mar 91 12:01:38 GMT
Distribution: comp
Organization: Logitek Plc.
Lines: 20

Hi,

	I have a problem, Using PC-Xview/16 and the Generic version of PC/TCP
v2.05, with the Clarkson packet drivers for the 3C503 board work fine.

	But, when using PC-Xview/16 and the Generic version of PC/TCP v2.05
with the NDIS to Packet Driver Converter v1.05, using any of the options
to start PC-Xview/16 fails, it looks as though when PC-Xview tries to start
the Kernel goes to sleep and PC-Xview doesn't get a response and fails with
unknown host(xxxxx) or unknown host(xxx.xxx.xxx.xxx) if you specify an 
internet address.

	I am using the same IPCUST.SYS and IFCUST.SYS for both configurations.

	Any ideas, is there a bug in the NDIS to Packet Driver converter.

	Alan Hourihane

	email: alanh@logitek.co.uk