Path: utzoo!news-server.csri.toronto.edu!rutgers!gatech!ncar!elroy.jpl.nasa.gov!usc!mtha.usc.edu!engwall
From: engwall@mtha.usc.edu (Ralph Engwall)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Ungermann-Bass Ethernet card
Message-ID: <31112@usc>
Date: 16 Mar 91 06:43:46 GMT
Sender: news@usc
Distribution: usa
Organization: University of Southern California, Los Angeles, CA
Lines: 15
Nntp-Posting-Host: mtha.usc.edu


  I've got an old Ungermann-Bass Ethernet Card with no Docs.  It's
a full length 8-bit card with a square controller chip made by 
Fujitsu at the top of the board.  It has a 15 pin transceiver cable 
connector, but no BNC thinwire connector.  Is this a PC/NIC board?  It 
doesn't respond to the version 8.x Clarkson packet driver for the PC/NIC. 
The packet driver gets as far as "Packet Driver is at segment xxxx"
and then the machine locks up.  I've tried several IRQ and I/O ADDR
settings, but no luck.  Any knowlageable UB users out hare that can
clue me in.
-- 
+-------------------------+-----------------------------------------------+
|  Ralph Engwall          | Q: Why am I banging my head against the wall? |
|  engwall@mtha.usc.edu   | A: Because it feels *so* good when I stop.    |
+-------------------------+-----------------------------------------------+