Path: utzoo!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!spool.mu.edu!uunet!av8tr!elliston
From: elliston@av8tr.UUCP (Keith Elliston)
Newsgroups: comp.sys.3b1
Subject: help with my EIA combo board
Message-ID: <638@av8tr.UUCP>
Date: 18 Mar 91 19:38:43 GMT
Article-I.D.: av8tr.638
Distribution: usa
Organization: Aviators Online BBS, Somerville, NJ
Lines: 23

Hello

I recently posted about problems with my 7300 (av8tr), and have decided
to take some of the advice.  So, I took out my 512K expansion boards (2),
populated the EIA combo with 1.5, and thoroughly cleaned out the machine
(the infamous Dust Bunny treatment).  I also made sure all my connections to
the powersupply and disk were good.

One problem so far...  I don't know how to configure the jumpers on the
combo board for 1.5 Mb.  I only get 0.5 out of it.  So, could some kind
soul tell me how to configure the board for 1.5?  I installed 36 addtn'l
256k/80ns chips on the board.

Thanks

Keith


-- 
Keith O. Elliston          elliston@av8tr.UUCP           elliston@msdrl.com
AA5A N9734U                elliston@mbcl.rutgers.edu     elliston@biovax.bitnet
"Beware of pseudo-experts with a mission and a grudge, especially if they are
 lawyers pretending to be scientists." -- H.W. Lewis in 'Technological Risk'