Path: utzoo!news-server.csri.toronto.edu!qucdn!leek Organization: Queen's University at Kingston Date: Sunday, 17 Mar 1991 16:14:11 EST From: Message-ID: <91076.161411LEEK@QUCDN.QueensU.CA> Newsgroups: comp.sys.amiga.hardware Subject: Re: Panasonic KX-P1124 Printer References: In article , stevek@amiglynx.UUCP (Steve Krulewitz) says: > >I own the Panasonic KX-P1124 printer and an Amiga, and I dont know what >printer driver to use with it! I currently use the Epson_LQ-2500 driver (with >the printer on the Epson LQ emulation mode) and the Panasonic_KX-P10xx driver >(seems pretty close). Can anyone help me fine the correct/best driver for >this printer? Also, how do you get this printer to print the IBM graphics >characters? Thanks - > > -=+ Steve Krulewitz +=- -=+ Fair Lawn, NJ +=- -=+ stevek@amiglynx.UUCP +=- I try to reach you through email, but I can't... You can Use Nec_Pinwriter instead. You can have all the resolutions from 90*180 dpi all the way up to 360*360 dpi !! This is on the 1.3 disk. I am using EpsonQPlus.020 from a local BBS, but it works with 020 and above CPUs. To use the IBM mode chars, you'll have to switch the printer to proprinter mode. Read the quick reference card on the back of the printer manual. You'll also have to use a proprinter driver. (Proprinter does not have the same command set as the LQ2500 emulation - in fact it can't do as much. I had the fun for writing IBM programs. :( ) Hope this helps... K. C. Lee Elec. Eng. Grad. Student