Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!lth.se!newsuser
From: d88pt@efd.lth.se (Peter Tomaszewski)
Newsgroups: comp.sys.atari.st.tech
Subject: Memory upgrade with 256Mbit rams.
Message-ID: <1991Mar15.161629.20972@lth.se>
Date: 15 Mar 91 16:16:29 GMT
Sender: newsuser@lth.se (LTH network news server)
Reply-To: d88pt@efd.lth.se (Peter Tomaszewski)
Organization: Lund Institute of Technology, Sweden
Lines: 13




HI,

I have been offered some 256Mbit rams really cheap. How do I fit them in
my atari 1040STFM. Can I just solder them on top of the existing rams?
What control signals should I use and where from on the pcb?
( I have 32 rams )



d88pt@efd.lth.se